Embellish Sticky Rinse-Away Mesh 20 x 10 yards - 844050018192
Skip Navigation Website Accessibility
212 S. 4th St.    Cañon City, CO.  
719-285-8088
805 Eagleridge Blvd. #140   Pueblo, CO

Family Owned and Operated
Authorized and Certified Dealer for
Baby Lock • Brother • Janome
Sewing & Embroidery Machines
"Your Hometown Sewing Store since 2012"

FREE SHIPPING on FABRIC OVER $60*

Contact Us / Hours / Directions
 


Embellish Sticky Rinse-Away Mesh 20" x 10 yards

left in stock in

Low in store inventory, may be subject to change

Embellish® Sticky Rinse-Away Mesh is a dense fibrous, water-soluble stabilizer with a light, sticky dissolvable coating and is used for items that are distinguished as “hard to hoop” or fabrics that could be harmed/ marked by the hooping process such as: baby onesies, necklines, collars, and cuffs. Embellish® Sticky Rinse- Away Mesh washes away clean with no messy residue and is excellent for supporting embroidery on delicate and sheer fabrics such as: batiste, chiffon, netting, organdy, organza, tulle, voile and sheer scarfs. The added adhesive prevents the fabric from shifting while embroidering, resulting in perfect outline stitches. Unlike other water-soluble stabilizers that are clear, the mesh properties of this stabilizer are not prone to stretching from embroidering dense designs with heavy needle penetration. Also available in a non-sticky version, Embellish® Rinse-Away Mesh.

Holds up to 12,000 embroidery stitches in a 4”x 4” hoop.

To Use:

 

  1. Hoop one piece of Embellish® Sticky Rinse-Away Mesh with the release paper (shiny side) facing up.
  2. Draw an “X” on the surface with the Embellish® Vinyl Weeding Tool, taking care not to puncture the stabilizer. This will perforate the release paper so it can easily be torn away, exposing the sticky surface.
  3. Finger-press the wrong side of the item to the sticky surface and smooth out the wrinkles.
  4. If the design has more than 12,000 stitches in a 4” x 4” hoop, “float” a piece of Embellish® Rinse-Away Mesh under the hoop for added support. *Note - If sticking down a garment such as a baby onesie or T-Shirt, prep the piece with the proper/recommended Embellish® stabilizer before sticking it down.
  5. It is recommended to slow the speed of your machine to “600” stitches per minute.
  6. Add an embroidery topper on top of the hooped item (either Embellish® Rinse-Away Clear Topper or Embellish® Iron-Away Clear Topper).
  7. Embroider the design. If your machine has an auto-baste function, it is recommended to baste the design and topper before embroidering.

 

To Remove:

 

  1. Remove the material from the hoop.
  2. Pull back and trim away as much of the stabilizer as possible.
  3. Soak the material in room temperature, soft water and change the water often until all the stabilizer and adhesive dissolves. Once the stabilizer and adhesive are dissolved, do a final rinse under room temperature, running water.

 

Important - It is necessary to use “soft” water to get optimal rinse results. If your water is hard or has high mineral deposits, it may be necessary to add a water softener to the bath while soaking your garment.